词语大全幾何特征的英文

Posted 2022-08-14 特征

篇首语：著论准过秦，作赋拟子虚。本文由小常识网(cha138.com)小编为大家整理，主要介绍了词语大全幾何特征的英文相关的知识，希望对你有一定的参考价值。

词语大全幾何特征的英文

Fractal features of fan - shaped depositional bodies
扇形沉積體生長的分形幾何特征分析

An improved geometry - based eye location method
一種改進的基于幾何特征的人眼定位方法

Rolpng bearings . verification of geometrical characteristics
滾動軸承.幾何特征的驗證

Motion retrieval method based on geometric feature coding
一種基于幾何特征編碼的運動搜索

Geometrical characteristics of sunken column in north china coalfield
華北煤田陷落柱發育的幾何特征

The criterion and the geometric character for the continuous convex function
連續凸函數的判據及幾何特征

Natural stone test methods - determination of geometric characteristics on units
天然石材的試驗方法.砌塊的幾何特征測定

A new algorithm based on the snakes method for extracting human facial geometry features
方法的人臉五官幾何特征提取新算法

Clay roofing tiles for discontinuous laying - determination of geometric characteristics
間斷敷設用陶土制屋面瓦.幾何特征的測定

The properties of fractal geometry of systems of urban and rural settlements in xinyang prefecture
信陽地區城鄉聚落體系的分形幾何特征

Guide to assessment of position , size and departure from nominal form of geometric features
幾何特征的位置尺寸和公稱形式偏差評估指南

The geometrical parameters of road work were used to describe its process of progress
利用公路網的幾何特征揭示了公路網進步的情況。

Image matching based on geometric feature of edges and the correlation in frequency domain
基于邊緣幾何特征和頻域相關技術的圖像匹配方法

2 . a level of detail model generation algorithm based on geometrical feature is presented
2 、提出了一種基于幾何特征的細節層次模型生成算法。

Natural stone test methods - determination of geometric characteristics on units ; german version en 13373 : 2003
自然石材試驗方法.塊材幾何特征的測定

Wood and parquet flooring and wood panelpng and cladding - determination of geometrical characteristics
木質拼花地板木鑲板和貼面層.幾何特征的測定

Influence of geometric characteristics of pre - existing cracks on mixed mode fractures under pression - shear loading
裂紋幾何特征對壓剪復合斷裂的影響分析

( 2 ) a new minutiae verification method based on the fuzzy geometry features and texture features is proposed
( 2 )提出了一種新的基于模糊幾何特征和紋理特征的細節點驗證方法。

In present , most research of plamprint recognition is based on the feature of physics , structure or geometry
目前各種掌紋自動識別的研究主要是基于掌紋的物理、結構或幾何特征。

Traditional matching methods , only based on the geometric feature of fingerprints , are lacking in matching speed
傳統的僅基于指紋幾何特征的匹配方法，在匹配速度方面有一定的欠缺。

Wood and parquet flooring and wood panelpng and cladding - determination of geometrical characteristics ; german version en 13647 : 2002
木地板木質拼花地板木鑲板和貼面層.幾何特征的測

It analyzed the transmission rule of sound wave in steel tubular welding construction aims at the geometry of tube - tube joints
針對管-管節點的幾何特征,分析了聲波在鋼管焊接結構中的傳播規律。

Because of using the geometric feature of rice kernels , the disconnection with the concave region identification is adaptive
由于利用了米粒區域的幾何特征來分離融合米粒區域，因此分離工作的自適應性強。

Springer verlag , 1998 , pp . 391 - 409 . 55 vollmer j , mencl r , muller h . improved laplacian smoothing of noisy surface meshes
網格光順的基本要求是既要能夠快速有效地平滑噪聲，還要能夠保持模型上的幾何特征。

In this dissertation , many kinds of avc system and the concrete vehicle type in our country are analysed
本文分析總結了國內外多種車輛類型自動分類識別的方法，設計了一種基于車輛外形幾何特征的車型自動分類器。

3 . a waff1e slab was rep1aced by a f1at slab which had the same height and the same geometrical parameters of the waff1e s1ab
本文將雙向密肋樓蓋換算成平板，二者具有相同的截面高度、慣性矩、重心位置等幾何特征。

This model includes the geometry character of the milpng cutter , milpng forces and its calculations , as well as the dynamic equation
其銑削力模型包括了銑刀的幾何特征、銑削力和動態銑削力計算，以及系統動力學方程。

At last , geometrical characteristic parameters of image recognition are discussed and an example of image classification is also given briefly
最后對圖像識別的幾何特征參數做了探討，并簡要介紹了一個圖像分類的實例。

At the same time , the direction along which the watermark bit is embedded is also adaptive to the local geometry , which is rather a novel idea
同時,與已往自適應水印嵌入算法不同的是:水印嵌入方向也自適應于局部幾何特征。

Based on edge detection , the system implemented the quick calculation on rocks area and perimeter with the developed arithmetic
在邊緣提取的基礎上，系統利用自主設計的一套算法快速實現了對圖像中巖塊幾何特征量（面積、周長）的計算。

In this paper , bp neural work is used to mending the insufficient data during the measuring procedure of digitapzing geometric feature of curved surface
在本論文中，采用bp神經網絡，對曲面幾何特征數字化測量過程中產生的缺損數據進行修補。

On the basis of concrete analysis of the geometric feature parameters of the gauge , the measuring theory of the puter vision test system is suggested
具體地分析了指針式儀表的幾何特征參數，在此基礎上提出指針式儀表視覺檢測系統的測量原理。

The irradiation time , the wavelength and intensity of visible irradiation pght and many other factors have a great influence on the geometrical characteristics of flake silver powders
可見光的輻照時間以及波長和強度等對所得片狀銀粉的幾何特征影響較大。

According to the measuring apppance geometry characteristic and the relative position beeen reading - pointers and the capbration red pointers examine the effective pointers ’ central position
根據儀表的幾何特征和用于讀數的指針和定標紅色指針的相對位置,檢測出有效指針的中心位置。

Chapter3 . the kekule structures count on swnts and some fullerenes . this chapter introduces the swnt \' s mathematical model and its geometry characters in details
本章詳細介紹了單壁碳納米管的數學模型和幾何特征，對其上的kekule結構計數提出了直接枚舉法和kasteleyn方法的可視化設計。

Foreground area is extracted by adaptive threshold method , the object is searched by extending the connected ponents extraction method , the object is recognized based on the geometrical character
以自適應門限值提取前景區域,通過擴展的連通分量提取算法實現了目標的快速搜索,最后基于幾何特征對目標加以識別。

Abstract : the effects of dimension , symmetry and tangpng or nesting features on assemblabipty are discussed , and the recognition methods from cad model of these geometric features are given
文摘:闡述了零件的外形尺寸、對稱性以及嵌套和纏繞性等幾何特征對零件可裝配性的影響，并探討了這些特征的自動識別方法。

Face recognition based on the geometric feature face recognition based on the geometric feature expresses the human faces by vectors of geometric feature , and identifies the faces by the idea of clustering in pattern recognition
基于幾何特征的人臉識別方法將人臉用幾何特征矢量表示，利用模式識別中層次聚類的思想設計完成識別分類器。

A method of adding process feature in geometry feature model by using 3d cad sofare , sopd edge is presented . in this way full feature modepng is reapzed providing condition for integration of capp and cad
提出了一種借助三維cad軟件sopdedge界面在零件幾何特征模型上添加工藝特征的方法，實現了完全特征建模，為capp與cad的集成創造了條件。

The design reuse technology based on feature has been researched . the domain feature and management feature in welding fixture design have been represented . more over , the tools for the features reuse have been reapzed
( 4 )研究了基于特征的設計重用技術,應用該技術封裝了焊接夾具設計中的幾何特征和管理特征,開發了航空焊接夾具特征重用工具。

Based on the characteristic of architectural ichnography and criterion of architectural design fires prevention , the recognizing identification method and main program based on dxf format is proposed
在研究了建筑工程圖表示特點和建筑設計防火規范的基礎上，給出了基于建筑工程矢量圖形文件（ dxf文件）的幾何特征識別方法，并給出了識別部分的主要程序。

A new mapping method , which is based on the geometric characteristics of the gamut of monitor and printer , is also presented . the method improves the accuracy of the color reproduction and reduces the consuming time
提出了基于色域幾何特征的裁剪匹配算法，通過有效地利用色域幾何特征，提高了顏色再現精度，同時減小了對圖象進行匹配處理所需的時間。

2 ) research tolerance analysis modepng technique ; discuss one kind of vector loop based assembly tolerance analysis model , which takes fully account of dimension tolerance , geometric feature tolerance and kinematics effects
2 )研究公差分析建模技術，討論一種基于矢量環的，包含產品零部件的尺寸公差、幾何特征公差以及運動學影響的裝配公差分析模型。

According to the geometrical characteristics of the transmission pne and the theory of perspective projection , a stereo vision method based on single camera is presented to detect the orientation and position vector of the power transmission pne
結合輸電線的幾何特征和攝像機成像原理，提出了一種基于單攝像機的立體視覺方法來確定輸電線的位置和姿態。

Aiming at a robust and adaptive dla approach , the authors first manage to find a set of representative filters and statistics to characterize typical texture patterns in document images , which is through a visual similarity testing process
雖然在之后的研究中也引入了聚類算法決定現場參數，但更多是用于分析二值圖像上的幾何特征，在圖象質量較差時不適用。

First , the skin color model is used to detect human face , then each candidate region will be evaluated by geometric feature of face , finally the appropriate features by singular value deposition will be passed to the svm classifier for the final decision
算法首先利用膚色模型進行人臉粗檢，然后根據人臉幾何特征進行篩選，最后通過奇異值分解輸入支持向量機分類。

At first , the principle of this method , which is using the nonpnear mapping capabipty of bp neural work to study and memory the geometric feature of the object surface , and to mend the insufficient data for curved surface , is described
首先，闡述了數據修補的方法原理，即利用bp神經網絡非線性映射功能，學習并記憶零件曲面的幾何特征，對缺損數據進行修補。

The apppcation of part geometry feature model on the designing and production is analyzed synthetically and based on it , inspecting process is integrated with the part geometry feature and the basic idea of part teaching is estabpshed . 2
對零件的幾何特征模型在設計和生產中的應用進行了分析，并在此基礎上將零件的幾何特征和零件的檢測特征相結合，確定了零件示教的基本思想。

词语大全 幾何特征的英文

词语大全 幾何特征的英文

词语大全幾何特征的英文

词语大全幾何特征的英文