数控冲床开机教程(台式冲床使用时注意事项)

台式冲床也是冲压小型机床，台式小型冲床可以在通过安装不同冲床模具可对原材料进行落料，冲孔，成型，拉伸，折弯，修整，铆接及挤压等产品成型操作。台式冲床同其他机械设备一样，操作人员需根据按照安全操作指导书正确操作，才能避免损坏台式冲床及冲床伤人事故发生。那么台式冲床使用时注意事项有哪些呢？

Desktop Punch is also a small stamping machine tool, desktop small punch can be installed in different punch mold can be raw materials for blanking, punching, molding, stretching, bending, trimming, riveting and extrusion and other product molding operations. Desktop Punch and other machinery and equipment, operators need to be in accordance with the safety instructions according to the correct operation, in order to avoid damage to the desktop punch and punch injury accident occurred. So what are the precautions when using a desktop punch?

一、台式冲床生产前应该空转待机1-3分钟，查看检查脚闸等控制装置的灵活性，确认正常后方可使用，电控等部件防护保险装置是否正常，冲床模具螺丝必须拧紧，操作人员应该正确使用设备上安全保护和控制装置，不得任意拆动。

First, the desktop punch should be idling standby for 1-3 minutes, to see the flexibility of the control device such as checking the foot brake, to confirm the normal rear can be used, electronic control and other parts of the protective safety device is normal, punch mold screws must be tightened, the operator should correctly use the equipment on the safety protection and control device, not arbitrary disassembly.

二、台式冲床开机前必须检查，活动部分润滑系统。台式冲床取动时或运转冲制中，操作者站立要恰当，手和头部应与冲床保持一定的距离，按模具时要紧牢固，上、下模对正，保证位置正确，用手搬转机床试冲（空车），确保在模具处于良好情况下工作。

Second, the desktop punch must be checked before starting, the active part of the lubrication system. Desktop Punch when moving or operating punching, the operator to stand properly, the hand and head should maintain a certain distance from the punch, according to the mold when the important firm, the upper and lower die alignment, to ensure the correct position, hand transfer machine tool test punching (empty car), to ensure that the mold in good condition to work.

三、台式冲床在加工小零件，精密零件时，可用专门工具，尽量不要直接用手接触模具送料机及取料，加工长体零件时，应设制安全托料架或采取其它安全措施，单冲时，手脚不准放在手、脚闸上，必须冲一次搬（踏）一下，严防事故。台式冲床生产工作完成后，及时断电，维护冲床，定期做6s工作。

Third, desktop punch in the processing of small parts, precision parts, can be used special tools, as far as possible not directly with the hand contact mold feeder and material, processing long body parts, should be set up a safety bracket or other safety measures, Tanchong, hands and feet are not allowed on the hands, feet, must be moved (tread) a bit, to prevent accidents. Desktop punch production work completed, timely power outage, maintenance punch, regular 6s work.

深圳市创盈时代科技有限公司是一家专注于冲床机械手,上下料机械手,冲压机械手，工业机器人，非标自动化设备的研发生产和销售于一体的国家高新技术厂家。

本文关键词：冲床使用注意事项